Salvis KKM Series, Перевод инструкции по эксплуатации

Страница: 17 / 40

17
3. OPERATION
3.1 Electronic controller
You will find the control elements above the installation compartment or as the
case may be the installation cupboard. See on page 18.
Picture 1: electronic controller
Switch on:
Press on-/off-switch of the electronic control for approx. 2 sec.
Switch lights-up – refrigeration counter is ready for operation.
Temperature control:
The desired temperature can be set by the electronic controller (see picture 1
electronic controller on page 18). In case none of these buttons are pressed, the
digital display shows the current value (room temperature).
When pushing button “SET” the rated value is displayed and you may check if the
right temperature is set.
If you now wish to adjust the rated value, push button “SET” first, than set the
desired value by button “UP” or “DOWN”. This rated value is adjustable within the
factory given limits only.
In case of power failure or as the case may be device switch off, the pre-set
values are kept.
GB