SALVIS AG
CH-4665 Oftringen www.salvis.ch
Salvis Fresh & Smart 1100
8
Errors and possible causes
Check the air circulation components for damage at least twice a year.
If there are any malfunctions, the Fresh & Smart must be separated from power by pulling the CEE power
plug.
Repairs on the Fresh & Smart or the used Smartline units must only be performed by a company
specializing in this type of work.
Caution!
Independent of the respective manufacturer, an intervention into the housing and appliance system
by anyone other than authorised personnel, will lead to immediately invalidity of all warranty
claims.
With malfunctions that are not traceable to contamination or insufficient cleaning, we recommend contacting
your supplier, who will in turn provide you with the address of an authorised specialty company.
Caution!
Only use the respective original manufacturer parts for any repair.
If the connection cable of the Fresh & Smart or the used cooking functions is damaged, the
appliance must not be used any longer and must remain separated from power until the
connection cable is replaced by an original spare part by the manufacturer or an authorised
specialty company.
Malfunction
Possible cause
Solution by / with
No power supply
Plug connections interrupted
User must check the plug connections
Cable defective
Solve through customer service
Cooking appliances to not
work
Plug not connected
Insert the plug
Appliance defective
Repair by customer service
Heavy smoke and odour
generation
Temperatures of cooking
appliances set too high
Reduce the set temperature to a maximum
of 230°C
Filter components blocked
Clean / replace the filters
Very difficult to move the
appliance
Wheels are locked
Release stops
Page 15