Salus OPTIMA, Руководство пользователя

Страница: 15 / 40

OPTIMA ZigBee Thermostat
9
Remove Old Thermostat
Remove the old thermostat from the
wall, taking care not to allow the wiring
to fall inside the wall.
Install Mounting Plate
Remove the mounting plate from the back of the Optima thermostat.
Use the included wall anchors and screws to attach the mounting
plate to the wall, making sure the wires run through the center
opening.
If there is space on the wall from
the old thermostat that needs to
be covered, insert the trim plate
between the mounting plate and
the wall, and mount both plates
using the same anchors and
screws. The trim plate can be
oriented vertically or horizontally
for proper coverage.
TIP: Wrap the wire ends
around a long stick, such as
a pencil to keep the wires
from falling into the wall.