20
'
Salus
User'
Manual
'
pairing process. Check with your connected home system
procedures for more details.
•
Prepare connected home system to add a thermostat.
•
Go to the
PAIR
menu item on the OPTIMA thermostat.
•
Press MODE to select pairing mode. Display will show
'
WILL
PAIR
.
•
Press MODE again to enter pairing mode. Display will show the
number 10 and
Pairing
.
•
Wait for the connected home system to recognize the
thermostat. The thermostat will blink
IDENTIFY
and return to
the Home Screen
when the thermostat has been added to the
system. The blinking
IDENTIFY
will go away after 3 minutes.
UPDATE
This menu item initiates a check for new firmware on the
connected home system and updates the firmware automatically if
one is found.
OPTIMA'ZigBee'Thermostat'
9
'
'
Remove'Old'Thermostat'
Remove the old thermostat from the
wall, taking care not to allow the wiring
to fall inside the wall.
Install'Mounting'Plate'
Remove the mounting plate from the back of the Optima thermostat.
Use the included wall anchors and screws to attach the mounting
plate to the wall, making sure the wires run through the center
opening.
If there is space on the wall from
the old thermostat that needs to
be covered, insert the trim plate
between the mounting plate and
the wall, and mount both plates
using the same anchors and
screws. The trim plate can be
oriented vertically or horizontally
for proper coverage.
TIP:
' Wrap' the' wire' ends'
around'a'long'stick,'such'as'
a' pencil' to' keep' the' wires'
from'falling'into'the'wall.'
