16
Salus
Changing the Set Point Temperature
To change the set point, simply touch the Up (+) or Down (+) button. The ambient
temperature will move to the time display area and the current set point will be
displayed in the Main Temperature display. The Message Display will indicate which set
point is being changed.
Touch the Main Temperature display to save the new set point and return to the Home
Screen. The thermostat will save the new set point after 3 seconds of no activity and
return to the Home Screen.
There is a minimum dead band between the Heat and Cool set points. If the set point
being changed gets too close to the other set point, the other set point will be adjusted
to maintain the separation. The default separation is 1.5°C / 3°F.
Fan Control
The Fan operates in one of two modes, Fan Auto and Fan On. Tapping the Fan icon
switches between the two modes.
•
Fan Auto
the fan will run when the thermostat calls for heat or cooling.
•
Fan On
the fan running continuously.
When you want the fan to be on regardless of the heating or cooling state, press to
display the Fan On icon on the home screen.
There will be a slight delay between selecting Fan On mode and the fan turning on.
