- antifrost mode 5°C
(changing temperature is avaible
only through the app)
- automatic mode
(works according to the schedule)
Press or button
to set start hour for program 1.
Press button to confirm.
Press or button
to set start hour for program 1.
Press button to confirm.
Press or button
to set start minutes for program 1.
Press button to confirm.
Press or button
to set start minutes for program 1.
Press button to confirm.
You can cancel temporary override by holding button
for 3 seconds. Setting indicator should disappear.
Press or button
to change temperature.
Press button to confirm.
Set hour value of boosting your
hot water by pressing
or button.
Press button to confirm.
Press button to select
temperature zone or HW.*
Press button to select
temperature zone or HW.*
Press button to select
temperature zone.*
Press button to select
hot water system .
*(only in two heating zones or one heating
zone + hot water system)
*(only in two heating zones or one heating
zone + hot water system)
*(only in two heating zones)
When iT500RX receiver
and iT500 thermostat are paired
then the light will be green.
Press or to return
to the home screen.
iT500 has successfully paired with
iT300 when the antenna stops
flashing.
Press or to return
to the home screen.
Press and hold and
buttons for 3 sec.
Press and hold and
buttons for 3 sec.
Press and hold and
buttons for 3 sec.
GMT
GMT+1 Hour
GMT+2 Hour
GMT+3 Hour
or
or
or
Press or button
to select temperature unit.
Press button to confirm.
Press or button
to select operating mode.
Press button to confirm.
Press or button
to select time zone (GMT).
Press button to confirm.
Press or button to select heating or cooling* mode. Press button to confirm.
*Cooling can only be selected if your system supports this.
5a
5b
6
7
5c
UK
IRELAND
PORTUGAL
ICELAND*
RUSSIA*
AUSTRIA
POLAND
GERMANY
CZECH
SPAIN
FRANCE
ITALY
SWITZERLAND
LUXEMBOURG
HOLLAND
BELGIUM
DENMARK
SWEDEN
NORWAY
MALTA
CROATIA
SERBIA
BOSNIA
SLOVENIA
SLOVAKIA
ESTONIA
TURKEY
CYPRUS
GREECE
ROMANIA
RUSSIA
UKRAINE
BULGARIA
LITHUANIA
BELARUS*
FINLAND
MOLDOVA
LATVIA
The countries marked with * do not observe Daylight Saving Time. For details please see below.
8
DST (Daylight Saving Time) ON will automatically change your time
from summer to winter.
Press or button
to turn ON or OFF day saving
time function.
Press button to confirm.
Pairing iT500 with iT500RX receiver
Program schedule for heating zone
Program schedule for hot water system
Setting the temperature
Operating modes
Setting the time and date
Pairing the iT300 to the thermostat
Lock Function
Using a paper clip, insert into the
hole marked SYNC at the bottom
of iT500RX receiver.
To pair iT300 to the receiver, insert
a paperclip or similar object into
the hole on the left hand side
of iT300 for 2 seconds.
Press button to launch
pairing process.
Press button to launch
pairing process.
Press or button
to set temperature level for
program 1. Press button
to confirm. Follow the steps 7-9
to set next programs.
Set time for turn OFF program 1
cognately to step 7-8.
Press button to confirm.
Follow the steps 7-9 to set
next programs.
The bottom switch will show
a constant red light when iT500RX
receiver is ready to pair.
Now go to iT500 thermostat.
A red light will flash in the top
right hand corner of the iT300.
Pairing process can take
up to 10 minutes.
Pairing process can take
up to 10 minutes.
1
1
5
5
2
2
6
6
3
1
3
4
2
4
7
7
FAILSAFE MODE:
In the event of RF signal loss, your system will
be switched on for 4 minutes, then off for 11 minutes. If you want to
disable FAILSAFE MODE when RF link has been lost then move the
slide switch on iT500RX to either the Manual or Off position.
The iT300 should be installed
in the area of the house that
the second zone will be
controlled from, ie. Upstairs.
Please note the red LED
on the iT300 will continue to
flash and eventually timeout.
You can easily set your schedule via iT500 Plus app . If you want to set schedules directly by the iT500
thermostat, please follow the instruction below.
When connected to the internet, the iT500 will set time and date automatically. However this can also be set
manually.
1
4
2
5
3
6
Press and hold button.
Press again button
to change value.
Press button to confirm.
Press or button
to set 12 or 24 hour format.
Press button to confirm.
Press or button
to set the hour.
Press button to confirm.
Follow the same steps to set
the minutes, day, month
and year.
Permanent manual mode
To enable or disable lock function press and hold and buttons
together.
Press the power button
to highlight the display.
Press the power button
to highlight the display.
Press the power button
to highlight the display.
1
2
3a
3b
Press the power button
to highlight the display.
Press and hold button
for 3 seconds.
Press and hold button
for 3 seconds.
Press button to confirm.
Press button to confirm.
Press button to confirm.
Press button to confirm.
1
1
4
4
7
7
2
3
2
5
5
8
8
3
4
3
6
6
9
9
Press the power button
to highlight the display.
Press the power button
to highlight the display.
Note:
In program schedule for hot water system (HW) you can set 3 schedule programs per day.
For each HW program you must define the time of start and the time of the end.
Note:
When you set program schedule, necessarily set all 6 programs. I.e. if you want to set 2
temperature levels, you need to set first temperature level for 1 to 5 program and set second
temperature level only for program 6.
In iT500 thermostat you can define 6 schedule programs per day. You can set different temperature level for each
program. While programming specific time interval you must be aware that you are about to set at what time the
program will start. For example, if you set program 1 for 6:00 (AM) it means the program is going to run at 6:00 (AM)
and will running till the time set for next program. Example of 4 temperature levels for 6 schedule programs:
P1
17°C
17°C
22°C
23°C
23°C
23°C
19°C
P2
P3
P4
P5
P6
P1
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
Press button to choose
ALL, 5/2 or INDIVIDUAL days.
Press button to confirm.
Press button to choose
ALL, 5/2 or INDIVIDUAL days.
Press button to confirm.
Setting up the iT500 thermostat
After powering up iT500 for the first time the display will go through the following sequence.
OTA (Over The Air
operated software)
revision number
The globe icon will
appear when the unit
automatically connects to
the internet via the SALUS
iTG500 Gateway. This
should take approximately
20 seconds.
iT500 Software revision
1
3
2
4
Selecting your system configuration
At any time press for return to the previous step or hold for 5 seconds to return to the home screen.
Press and hold
and buttons for 3 sec.
Press button to confirm.
Two central heating zones.
One central heating zone.
+
+
One central heating zone
+ hot water system
Press or button to select your system configuration. To confirm press button.
This menu should only be entered by the installer as changes can have a detrimental effect on your heating system.
1
2
4b
4a
3
4c
Press the power button
to highlight the display.
Note:
If you set the temperature in AUTO mode (temporary override) the setpoint temperature won’t be
changed until the next program starts.
Note:
iT300 purchased separately. Can only be used if your system supports second central heating zone.
