Tel: 886.2.2175 2930 Email: [email protected]
25
[
ф
M]
Menu description: Phase modulation function, user can set [Phase] and [Rate] in submenu. Carrier wave output is configured in
【
FREQ
】
and
【
AMPTD
】
, refer to section 6.2 and section 6.3.
[Digital]
Menu description: S1131 support ASK, FSK, PSK modulation. 2ASK is supported, user can configure [ASK Deep] and [Rate] in submenu.
2FSK, 4FSK, 8FSK are supported, user can configure [FSK Offset] and [Rate]. 2PSK, 4PSK and 8PSK are supported, user can set
[Deviation] and [Rate].
[Pulse]
Menu description: S1131 supports pulse modulation, user can select [Internal] [Source], [External][Source] to do the modulation. User
can configure the pulse [Period] and pulse [Width] in submenu.
[LF]
Menu description: LF function is provided to output the internal modulation source signal. Sine, square, triangle, ramp wave forms are
supported.
[Extrf]
Menu description: External IF input. Frequency of input signal should
≤
300MHz
6.7
Aux
【
Aux
】
contains [LAN], [SCPI Refresh], [Language] and [Service]
