Tel: 886.2.2175 2930 Email: [email protected]
20
6.2
FREQ
The
【
FREQ
】
key on the front panel is used to set parameters related to the signal generator frequency, including [Ref Set], [Ref State],
[Offset], [Multiplier], [10MHzRef]. Following diagram gives a direct view of the menu structure
[Ref Set]
Menu description: To set the reference frequency
[Ref State]
Menu description: To enable/disable reference frequency
[Offset]
Menu description: to set the frequency offset, for example, set the [Offset] to 500MHz and set the output frequency to 3GHz, the output
frequency will be 2.5GHz.
[Multiplier]
Menu description: to set the frequency multiplier, for example, set the [Multiplier] to 2 and set the output frequency to 3GHz, the final
output signal frequency will be 1.5GHz
[10MHzRef]
Menu description: to switch between internal 10MHz Reference source and external 10MHz source.
