Tel: 886. 909 602 109 Email: [email protected]
10
Fig. 6 Boot screen (left). Work mode interface(right)
2.4 Front Panel Description
The front panel is shown in Fig. 7. The function of each element is described below:
Fig. 7 Elements in front panel
1. RF Input — 2.92-K type steel connector, 50 ohm matched impedance.
2. Status Indicator — Orange: Standby mode. Green: Working mode. Red: Hardware error.
3. Intermediate frequency output — SMA type interface, the analog intermediate frequency signal output port.
4. Trigger input1 — SMA type interface, the trigger signal 1 input, 0~5V input voltage range.
5. Trigger input2 — SMA type interface, the trigger signal 1 input, 0~5V input voltage range.
6. Reference input — SMA type interface, Connect to 10 MHz external reference source for reference synchronization.
7. Reference source output — SMA type interface, 10 MHz internal reference signal output for reference synchronization.
2.5 Rear Panel Description
The rear panel is shown in Fig. 8. The function of each element is described below:
