DESCRIPTION OF PARTS
1. Removable Shelves
2. Leveling Legs (4)
3. Water Tray (not shown)
4. Wine Racks
5. Control Panel
a. Interior Light Button
b. LED Display
c. Raise Temperature Button
d. Lower Temperature Button
INSTALLATION
1. The unit is designed to be free standing only, it should not be recessed or
built-in.
2. Ensure that your wine cooler works at the maximum efficiency, follow the
recommended clearances below:
- sides 2” (50 mm)
- top 2” (50 mm)
- back 2” (50 mm)
3. Place the Wine Cellar on a flat level surface that is strong enough to
support it when fully loaded. Do no place the unit in direct sunlight and
sources of heat (stove, heater, radiator, etc.).
4. DO NOT place next to any appliance that emits large amount of heat, such
as a dishwasher, microwave, oven, toaster, etc. or in direct sunlight. Direct
sunlight may affect the acrylic coating and heat sources may increase
electrical consumption.
5. Extreme cold ambient temperatures may also cause the appliance not to
perform properly.
6. To help with door closure, position leveling legs with a 1/8" (3 mm) tilt to
the back. Adjust the leveling legs by turning clockwise to raise and
counterclockwise to lower.
7. Install the legs by screwing in the legs into the preset screw holes. (Please
note that the leg which stands on the hinge is the shorter leg.)
8. Gently slide the racks into the unit.
4
5d
5c
5b
5a
Booklet_WC-2059_EN.qxd 7/30/08 2:16 PM Page 4
