4
adjustment or repair. Always insist on the use of original spare parts. Failure to
comply with the above mentioned pre-cautions and instructions, could affect the safe
operation of this machine.
PARTS DIAGRAM
ASSEMBLING AND USING YOUR STAND BOWL MIXER
1) Take the stand and bowl mixer out of the box and take off any protective wrappings.
2) Place the stand on a smooth level surface.
3) Ensure the mixer is unplugged and the speed control is set to “0”
4) To insert the beaters or dough hooks, hold the handle of the mixer with one hand and
insert the first accessory rod into the slot with the other hand, inserting it gently until it
clips/locks into position. Repeat the same process with the other rod.
NOTE: When the mixer is in positioned to the right hand side of the mixer.
5) Plug the stand & bowl mixer into the mains and insert the accessories into the centre
of the mixture.
6) Turn the speed control to “1” and then select a speed suitable for the required process.
7) When you have finished using your stand & bowl mixer, turn the speed to “0”, unplug
the appliance and remove the accessories by pressing the eject button.
1) Ejector
knob
2) Speed
selector
3) Turbo
button
4) Bowl
5) Beaters
6) Dough
hooks
7)
Body
8) Cord
9) Cord
storage
10) Support arm
11) Tilt button
1
2
3
7
10
5
4
8
9
11
6
