● To fill the kettle, remove it from the power base and open the lid by pulling
upwards on the lid grip, fill with the desired amount of water, and then securely
close the lid. Alternatively, the kettle may be filled through the spout. The water
level should not exceed the MAX mark or sit below MIN level. Too little water will
cause the kettle to switch off before the water has boiled.
● NOTE: Do not fill the water over the MAX1.7L level, as water may spill out of the
spout when boiling. Ensure that the lid is securely closed before plugging the
power outlet.
● Position the kettle on the power base.
● Connect the plug into a power outlet. Press the On/Off switch, the indicator light
in the switch will light up and the kettle will start to boil. Once the water has
boiled, the On/Off switch will go off automatically. You can shut off the power by
lifting the On/Off switch at any moment during boiling. If you want to boil water
again, only press the On/Off switch directly to restart the kettle.
● NOTE: Ensure that the On/Off switch is free of obstructions and the lid is firmly
closed as the kettle will not turn off if the switch is constrained or if the lid is
opened.
● Lift the kettle from the power base and carefully pour out the water through the
spout.
● NOTE: Take caution when pouring water from your kettle as boiling water may
result in scald and remember to not open the lid while the water in the kettle is
hot.
● The kettle will not re-boil until the On/Off switch is pressed again.
● The kettle may be kept on the power base when not in use.
1. NOTE: Always disconnect the power supply when not use.
BOIL-DRY PROTECTION
Should you accidentally let the kettle operate without water inside - the boil-dry
protection will automatically switch off the power. If this occurs, allow the kettle to cool
before filling with cold water again.
CLEANING AND MAINTENANCE
Always disconnect the appliance from the power outlet and cool it down completely
before cleaning.
● This appliance is for household use only and is not user serviceable.
● Do not open or change any parts by yourself. Please refer to a qualified electrical
service department or return to the supplier if servicing is necessary.
● Always remember to unplug the unit from the electrical outlet when not in use
and before cleaning.
● Remember to clean the filter at intervals. For easier cleaning, detach the filter
and then replace it after cleaning.
● When not in use, the power cord can be stored at on the underside of the power
base.
● When not in use or when you want to store your kettle, the power cord may be
wound underneath the kettle.
5
