6
BLADE LEVER
The lever is conveniently located near your thumb (if you’re right-handed) so it
can easily be adjusted while the clipper is in your hand.
The lever adds versatility to your clipper by allowing you to gradually change the
closeness of your cut without an attachment comb.
When the lever is in the uppermost position, the blades will give you the closest
cut and leave the hair very short. Pushing the lever downward gradually
increases the cutting length.
In its lowest position, the lever will leave the hair approximately the same length
as comb #1.
The lever will also extend the use of your blades since a different cutting edge is
used in each setting.
In addition, if extremely heavy hair cutting has jammed the blades, it will help if
you remove the hair, once it has become wedged between the two blades
without removing the blades.
While the clipper is running, rapidly move the lever form “close cut” to “longer cut”
a couple of times. It is recommended to do this every time after you have finished
using your clipper, this will help to keep the blades clear of cut hair.
