7
7. ECO: Once the Eco mode is selected the indicator light will switch on.
8. The temperature and timer will be shown on the same display screen. The
ambient temperature is displayed when the power is turned on, and the
corresponding icon lights up. If you select the timer option, the icon will
light up. After the time is set, the ambient temperature will be displayed
again few seconds later.
9. If the unit is switched off whilst in cool mode, power will only be switched
off after 5 minutes once the filter is dry.
Filling the air cooler
NOTE:
Always ensure the air cooler is disconnected before filling the water tank.
Do not use hot water.
Do not use any other liquids except water.
•
Rotate the small knob on the back panel upward to gently release the
water tank
partially
(DO NOT REMOVE IT COMPLETELY AS THE
PUMP IS CONNECTED TO THE WATER TANK).
•
A jug can be used to transfer water into the partially opened water tank
NOTE:
Do not fill the tank past the max mark and ensure the water is
above the minimum mark.
•
Once the tank is filled gently push it back into the cooler and turn the
knobs to hold the tank in place.
