6. Ingredients may be added at this time.
7. While pressing the Tilt Button, lower the Mixer Head until it clicks into place.
8. Plug the Stand Mixer into a 120 Volt wall outlet.
9. Select the Hand Mixer speed and then the Bowl speed. Always set the
Hand Mixer speed before the Bowl speed to prevent ingredients from being
ejected from the Bowl. (See the recommended Mixing Speed Chart below)
10. Upon completion of mixing turn the 5-Speed Switch and Bowl Speed
Dial to ‘0’ (Off).
11. Unplug the power cord.
12. While depressing the Tilt Button, raise the Mixer Head until it locks into
the raised position.
13. With fingers placed loosely around the spindle of the attachments,
press the Eject Button to release them from the Sockets.
14. Detach and remove the Bowl from the Base.
15. Remove the Hand Mixer from the Mixer Head.
16. Follow the directions in Care and Cleaning section.
HAND MIXER
1. Place the stainless steel Bowl that is included with this unit or any other
suitable mixing bowl on a level, dry and stable working surface. Ensure
that the Speed Switch is in the ‘0’ (Off) position.
2. Ingredients should be added to the Bowl.
3. Install desired attachment to the Hand Mixer.
4. Plug Hand Mixer into a 120 Volt wall outlet.
5. Select the HI or LO position on the HI/LO Speed Switch. Then select the
desired Hand Mixer speed on the 5 Speed Switch. (See the recommended
Mixing Speed Chart below)
6. Hold the Bowl securely while mixing.
7. Upon completion, turn the 5-Speed Switch to ‘0’ (Off).
8. Unplug the power cord.
9. Remove the attachments from the Hand Mixer.
10. Follow the directions in the Care and Cleaning section.
7
KM-25 Booklet v03 7/23/04 5:45 PM Page 20
