Salton JK1657, Инструкция пользователя

Страница: 4 / 8

3. Close the Lid. Ensure that it snaps tightly into place.
4. Place Kettle and Base on a flat, level, dry, heat resistant surface.
Ensure that it is correctly engaged on the Base.
5. Plug into a 120V AC wall outlet.
NOTE: Never plug kettle into an electrical outlet when the kettle is
empty.
6. Direct kettle spout away from cabinets, walls, etc. to prevent possible
steam damage.
7. The default temperature is 100°C (212°F). The variable temperature
range is 40 to 100°C (105° - 212°F) in 10 degree Celsius increments.
8. To boil water:
- Press the power button once. The blue indicator light in the
power button will illuminate.
- To switch between the Celsius and Fahrenheit display press the
°F/°C button once.
- The display will show 100°C (212°F) for 3 seconds then the display
will switch to the actual water temperature. The display temperature
will increase until the kettle reaches 100°C (212°F). Then the kettle
will shut off.
- The display will show 100°C (212°F) for 5 minutes then the display
with show the decreasing water temperature as it cools.
9. To use the variable temperature settings:
- Press the power button wait 3 seconds then press the ‘-‘ or ‘+’
buttons until you reach the desired temperature between
40 – 100°C (104 – 212°F) in 10 degree Celsius increments.
- To switch between the Celsius and Fahrenheit display press the
°F/°C button once.
- The display will show the chosen temperature for 3 seconds then
will switch to the actual water temperature. The display temperature
will increase until it reaches the chosen temperature. Then the kettle
will shut off.
- The chosen temperature will be displayed for 5 minutes then the
display will show the decreasing water temperature as it cools.
10.IMPORTANT:
a) The kettle shuts off automatically after the boiling cycle is complete.
b) If the kettle is removed from the base before the boiling cycle is
complete the boiling cycle will be cancelled.
c) To turn the kettle off before the boiling cycle is complete press the
Power Button.
11.The Lid should not be opened when the Kettle is hot.
12.If you want to use the Kettle again, allow the thermal safety switch
to cool down for 15 to 20 seconds then follow the directions in #8 or
#9 above.
13.Only grip the Kettle by the Handle as all other surfaces will be hot.
14.Return the Kettle to the Base or a heat resistant surface after use.
4