fruit make the juice thick and cloudy. Apple juice may turn brown quickly. A
few drops of lemon juice will slow down the process. Shake the leaves of
vegetables or herbs to remove excess water. Discard stalks, stems, etc.
before processing.
5. Cut fruits and vegetables into pieces that will fit into the Food Chute.
6. Turn the unit onto either High or Low speed:
- High speed for hard and less juicy fruit and vegetables such as carrots,
pineapple and apple.
- Low speed for soft and juicy fruit or vegetables such as melons, tomatoes
and citrus fruits.
7. Insert fruit and vegetables into the Food Chute. Use the Food Pusher to push
food into the Chute.
NEVER USE YOUR FINGERS OR ANY OTHER
OBJECT
IN THE FOOD CHUTE.
8. Continue juicing until the juice container or the Pulp Container is full. Press
the ‘Off’ button. Remove and empty these containers as necessary. See the
'Care & Cleaning ' section. NOTE: If the Juice Extractor starts to produce
less juice or vibrates, remove and clean the Grating Sieve.
Blender
1. Remove the Pulp Container and place the Blender on the Base (see the Care
and Cleaning section for assembly instructions).
2. Plug into a 120V wall outlet.
3. Cut food into small pieces (1" x 1-1/4" or 2 - 3 cm) and place in the Blender.
4. Do not fill to more than the 'max' level on the Blender Jar.
5. When chopping nuts or other dry mixtures use 3/4 cup (180 ml) at a time, to
ensure even chopping.
6. Turn on the Blender by pressing the Control Button, High, Low or Pulse.
- High speed: For heavier mixes such as fruit, soups and mayonnaise.
- Low speed: For light blending such as batters, milk shakes, sauces and
scrambled eggs.
- Pulse: For a quick burst of power and to crush ice. When Pulse is selected
the button must be pressed and held in position.
7. While the motor is running, ingredients can be added through the Filler Cap in
the center of the Blender Lid. NEVER POUR BOILING LIQUID INTO THE
JAR.
8. When turning off the Blender, wait until the blades have stopped before
removing the Blender Jar.
9. NOTE: Do not operate the Blender for more than one minute especially when
processing dry ingredients. Do not run the Blender when empty.
10. To crush ice, add 1/4 cup of water to 1 cup of ice cubes. Use the Pulse
setting in small bursts. Place your hand on top of the Blender Lid to reduce
the vibration. When crushed completely the ice will have a snowy texture.
Содержание JEB-10
Страница 1: ...JUICE EXTRACTOR BLENDER MODEL JEB 10 ...
