TIMER Function
Auto-Off Timer
The Timer allows you to program the induction cooker to turn off after a
certain time.
Once you have chosen the desired cooking function (POWER or
TEMPERATURE), press the Timer Button. The Timer Indicator Light will
illuminate and the default time that will appear on the display screen is
00:30. Press the +/- buttons to adjust the cooking time from 1 minute up to
3 hours in increments of one minute.
NOTE:
The + Button will adjust the minutes and the – Button will adjust the
hours.
Once you have selected the desired shut off time, the screen will blink 5
times, then beep confirming your selection.
When the programmed time has elapsed the induction cooker will beep once
and shut off automatically.
NOTE:
If at any time during the cooking cycle you would like to cancel the
‘programmed time’ simply press on the Timer Button. The unit will beep and
the Display Window will blink. Use the + and – Buttons to return the time to
00:00. The screen will blink 5 times, then beep. The Timer Indicator Light will
go off confirming the Timer is no longer active.
IMPORTANT NOTES:
1. This Induction Cooktop will only operate with suitable Cookware. The
most common types are cast iron, enameled and stainless steel. The
Induction Cooktop will not operate when using aluminum, ceramic,
copper, glass or pyrex or cookware that has a concave bottom.
NOTE: Cookware should have a diameter no less than 12cm (4.75”) or
more than 26cm (10.25”) in order to work correctly. If the Cookware is
larger than the circular cookware placement guides indicated on the
Induction Cooktop, the area outside these guides will not work causing
an inconsistent heating pattern.
2. If the Induction cooker has been turned on without a compatible pot in
place the unit will beep for approximately 30 seconds, error code E1 will
be appear in the Display Window and the unit will shut off automatically.
3. The unit will automatically turn off is the voltage rises over 150 volts or
drops to less than 80 volts.
7
Booklet_ID1445_ENG_Salton Booklet 1/27/15 11:18 PM Page 7
