NOTE: DO NOT overfill with ice or the Silicone Molds will not fit
properly over the ice.
3. Place the Silicone Molds over the Interlocking Ice Trays.
4. Slide the Heated Base power cord underneath the Interlocking Ice
Trays then place the Heating Pot in the center of the circle.
5. Plug the unit into a 120V wall outlet.
6. Press the On/Off Switch on the Heated Base to the On (I) position and
preheat.
7. Use your own recipe or follow one of the recipes in this instruction
manual and add the ingredients in the Heating Pot.
8. IMPORTANT: Be very careful not to fill past the MAX marking
inside the Heating Pot.
NOTE: Maximum capacity of the Heating Pot is 1 cup.
9. Place the Heating Pot inside the Heated Base and heat for 5-10
minutes until the gelatin has dissolved and mixture is runny. Stir
mixture occasionally.
IMPORTANT:
- NEVER leave the unit unattended while in use.
- DO NOT let mixture boil over, as this could cause burns.
10.Once the mixture is ready, press the On/Off Switch on the Heated
Base to the Off (O) position and unplug the cord from the wall outlet.
11.Grab the Heating Pot by the Handles and carefully pour the mixture
into the Silicone Molds using the spout on the Heating Pot.
12.Let the gummies cool for approximately 15 minutes.
13.Once the gummies have solidified, remove from the Silicone Molds
and enjoy or store in an airtight container in the fridge for about
1 week.
CARE AND CLEANING
1. Unplug the cord from the wall outlet and allow the Heated Base and
Heating Pot to cool.
2. Wash the Heating Pot, Silicone Molds and Interlocking Ice Trays with
a soft cloth in warm soapy water.
NOTE: The Silicone Molds can be washed in the dishwasher on the
TOP RACK ONLY.
NOTE: DO NOT use steel wool or abrasive cleaners on any part of
your appliance.
3. Dry thoroughly with a soft cloth.
4. Wipe outside and inside of Heated Base with a damp cloth and dry.
IMPORTANT: Never immerse Heated Base, cord or plug in water or
any other liquid.
5. All servicing, other than cleaning, should be performed by an
authorized service representative. See Warranty section.
4