5
5. a)
Frothing only (without heat
)
Press the Cold button; the blue indicator light will illuminate and
frothing will begin. Once milk is frothed the blue indicator light will go
off.
b)
Frothing and Heating / Heating only
Press the Heat button; the red indicator light will illuminate and
frothing and/or heating will begin. Once milk is frothed and/or heated
the red indicator light will go off.
6. After frothing or heating, allow the unit to cool for a few minutes
before reusing.
7. If the Frother is accidentally plugged in dry and turned on, the unit will
automatically shut off after 30 seconds to prevent overheating. If this
situation occurs, unplug power cord and let the Frother cool before
using.
8. The power cord must be disconnected from the wall outlet when the
Frother is not in use.
CARE AND CLEANING
1. Unplug the power cord from wall outlet and allow the Frother to cool
before cleaning.
2. Wash the Lid, Whisks and inside of the Frother in warm soapy water.
DO NOT
place in the dishwasher. Wipe the outside of Frother with a
damp cloth.
DO NOT
USE ABRASIVE CLEANERS ON ANY PART OF THE UNIT
INCLUDING THE LID AND THE INSIDE WALLS OF THE FROTHER.
DO NOT
IMMERSE FROTHER OR THE BASE IN WATER OR ANY
OTHER LIQUID.
3. Store Whisks inside of Frother to avoid loss.
4. All servicing, other than cleaning, should be performed by an
authorized service representative. See Warranty section.
Salton_FR1416_InstructionBooklet_E.indd 5
Salton_FR1416_InstructionBooklet_E.indd 5
13-07-11 4:37 PM
13-07-11 4:37 PM