BEFORE FIRST USE
Wash the Carafe, Filter Holder and Permanent Filter in warm soapy
water. Rinse thoroughly and dry. Wipe the Main Housing with a soft
damp cloth. Do not immerse the Main Housing in water or any other
liquid.
Prior to brewing coffee for the first time run the machine with water only.
Follow the directions in the HOW TO USE section omitting the coffee
and Permanent Filter.
HOW TO USE
To Set the Clock
1. Plug into a 120 Volt AC wall outlet.
2. Press the PROG Button once and the word CLOCK will appear in
the upper right of the display.
3. Turn the Dial while the hour is flashing to select the hour. To set the
minute, wait for the minute to flash and turn the Dial to select the
minute. Once the minute has been set, press the PROG button 3
times or wait until the display is no longer flashing.
Immediate Brewing
1. Lift the Lid and fill the Water Reservoir with fresh cold water for the
desired number of cups. Fill the Water Reservoir by filling the Carafe
and pouring water into the Water Reservoir.
NOTE: Do not fill above the maximum Water Line (10) or less than
the minimum Water Line (4) indicated on the Carafe and Water
Reservoir.
2. Remove the Reusable Filter and fill with the desired amount of
ground coffee.
NOTE: Use coffee that is ground specifically for automatic drip
coffee makers. Usually one Coffee Measuring Scoop or a level
tablespoon of ground coffee is used for each cup of coffee. Adjust
the amount to your personal taste.
3. Reposition the Reusable Filter and close the Lid.
NOTE: If the Lid does not close completely, ensure that the Filter
Holder and Reusable Filter are properly seated in position.
4. Place the Carafe with Lid on the Keep Warm Plate. NOTE: To use
the Bold Setting function, hold the PROG button for 3 seconds.
The Bold Setting Indicator (two coffee beans), will illuminate in the
bottom right of the Display when this setting is engaged. To turn off
this setting, hold the PROG button for 3 seconds.
4
