HOW TO USE
To Set the Clock:
1. Plug the Power Cord into the wall outlet.
2. Press the Program (PROG) Button once and the word ‘SET TIME’ will be
displayed.
3. Press the HOUR and MINUTE (MIN) Buttons to select the correct time.
NOTE: To scroll through the numbers faster, press and hold the Hour or
Minute Buttons.
4. The words 'SET TIME' will disappear from the Display Window after
5 seconds.
Immediate Brewing:
1. Fill the Water Reservoir with fresh cold water for the desired number of cups.
NOTE: Do not fill above the MAX line or less than the MIN line indicated
on the Water Reservoir.
2. Open the Filter Basket Holder and fill the Filter Basket with the desired
amount of ground coffee.
NOTE: Use ground coffee specifically for automatic drip coffee makers.
Usually one Coffee Measuring Scoop or a level tablespoon of ground coffee
is used for each cup of coffee. Adjust the amount to your personal taste.
3. Close the Filter Basket Holder.
NOTE: If the door does not close completely, check to see that the coffee
filter is properly seated in the Filter Basket Holder then snap the door into
place.
4. Place the Carafe with Lid on the Keep Warm Plate.
5. Plug into a 120 Volt AC outlet.
6. Press the ON/OFF Button twice and the red Power Indicator Light will
illuminate indicating that the Coffee Maker is in the brew cycle.
In a few minutes the coffee will be brewed and the Coffee Maker will
automatically switch over to ‘Keep Warm’ mode for a maximum of 2
hours. Press the On/Off Button once or unplug the appliance to
cancel the ‘Keep Warm’ mode. Both indicator lights will be out.
4
Booklet_FC1214_ENG:Salton Booklet 3/28/11 12:07 PM Page 4
