3. Swivel the Water Spreader to the left. Fill the Permanent Coffee Filter
with 1 - 2 tbsp. (15 - 30 ml) of ground coffee for ‘drip coffee makers’.
Return the Water Spreader to its original position and
close the Cover.
4. Plug unit into a 120 Volt A.C. outlet.
5. Press the On/Off Switch to the ‘On’ position and the Indicator Light
will illuminate.
6. Once the coffee has finished dripping into the Mug,
press the On/Off
Switch to the ‘Off’ position.
7.
Unplug unit from outlet
or follow directions above to prepare another
cup of coffee. Be careful when opening the Reservoir Cover when the
unit it hot.
How to Heat Water for Tea, Hot Chocolate, etc.
1. Fill the Mug with fresh cold water and pour into the Water Reservoir.
NOTE:
There is a MAX fill line inside the Water Reservoir. Do not fill past
this level or water will overflow once it has been dispensed into the Mug.
2. Swivel the Water Spreader to the left and remove the Permanent Coffee
Filter. Return Water Spreader to its original position.
3. Place a tea bag, hot chocolate, or instant foods etc. in the Mug. Place
the Mug under the Coffee Dispenser. The Mug Cover can be taken off or
left on. If it is left on, be sure that the sipping hole is in the open position
so water can flow through into the Mug.
4. Plug unit into a 120 Volt A.C. outlet.
5. Press the On/Off Switch to the ‘On’ position and the Indicator
Light will illuminate.
6.
IMPORTANT:
Once the water has finished dripping into the mug,
press the On/Off Switch to the ‘Off’ position.
7. Unplug unit from outlet or follow directions above for more hot water.
Be careful when opening the Reservoir Cover when the unit it hot.
4
Booklet FC-3T V005 5/13/04 3:48 PM Page 10
