Salton FC-120E Скачать руководство пользователя страница 3

DESCRIPTION OF PARTS 

 
1) Water Reservoir Lid  
2) Filter Basket Holder 
3) Filter Basket (inside of Holder) 
4) Main Housing 
5) Water Level Window  
6) Keep Warm Plate 
7) Carafe 
8) Carafe Water Level Markings  
9) Digital Clock Display  
10) Hour Advance Button  
11) Minute Advance Button  
12) Delay Brew Button  
13) Start/Stop Button  
14) Delay Brew Indicator Light  
15) On/Off Indicator Light 
 
 
 

BEFORE FIRST USE  

 
Wash the Carafe, Lid and Filter Basket in warm soapy water.  Rinse thoroughly 
and dry.   Wipe the base of the unit with a soft damp cloth.  Do not immerse base 
in water or any other liquid.    
 
Prior to brewing coffee for the first time run the machine with water only.  Follow 
the directions in the HOW TO USE section omitting the coffee and coffee filter.  
 

HOW TO USE 

 
1) Plug into a 120 Volt AC outlet.   
2) Swing the Filter Basket Holder outward to the left.  Place a #4 cone-shaped 

paper filter, a permanent filter (SwissGold model KF-4 or a Jasi Goldtone 
model KF-4T) in the Filter Basket.   Fill the coffee filter with the desired 
amount of ground coffee.  See Recommended Amount of Coffee chart below.   
NOTE:  Use coffee ground specifically for automatic drip coffee makers.  

3) Close the Filter Basket Holder and snap into place.  NOTE:  If the door does 

not close completely, check to see that the Filter Basket is properly seated in 
the Filter Holder then snap the door into place.  

4) Fill the carafe with cold water for the desired amount of cups of coffee.  

NOTE:  Do not make less than 4 cups.  Open the Water Reservoir Lid and 
pour the water from the Carafe.  Close the Water Reservoir Lid.  NOTE:  Use 
only cold water.  

5) Place the Carafe with Lid on the Keep Warm Plate.  NOTE:  The Lid must be 

placed on the Carafe. 

Отзывы: