4. When the Ready Light goes off the water has reached the correct
temperature.
5. Swing the Steam Nozzle to the outside and place a heat-resistant pitcher
under the Steam Nozzle.
6. Turn the Function Selector to the right to the steam position ‘ / ’.
7. Hot water now flows into your pitcher.
8. Stop the brewing process as soon as the pitcher is full. Turn the Function
Selector back to the ‘ ’ position and turn the machine off by pushing the
On/Off Switch to the up position.
CARE AND CLEANING
Unplug the appliance from the electrical outlet and allow it to cool completely
before cleaning.
1. In order to empty the Drip Tray, remove it completely from the machine
and lift the Cover. The Drip Tray should be emptied regularly.
2. The Water Tank, Drip Tray, Drip Tray Cover, Filters, Filter Holder and
Frothing Tip can be cleaned by hand in warm soapy water. Rinse the parts
in clear water and dry thoroughly.
3.
Never
wash any components in a dishwasher.
4. If the holes in the Filters become clogged, clean the Filter with a fine
brush.
5. Milk residue will build up on the Steam Nozzle and Frothing Tip. It is very
important to wipe them with a damp cloth after each use. This will prevent
clogging and ensure perfect results. The frothing tip may be removed for
easy cleaning. However, if clogging does occur pull the Frothing Tip off the
Steam Nozzle tube and use a paper clip or needle to loosen any milk
remnants in the Nozzle. Rinse the Frothing Tip under a faucet and replace
on the Steam Tube.
6. Wipe the outside of the unit with a damp cloth.
Never
immerse the
appliance in water or in any other liquid.
DO NOT
use abrasive cleaners.
9