Salton Elite SW015E, Инструкция по эксплуатации

Страница: 5 / 9

5
OPERATING INSTRUCTIONS
PRIOR TO FIRST USE
- It is important to read the instructions carefully before use.
- Wipe the mould surfaces with a damp cloth.
- Grease mould surfaces (butter, margarine or oil) prior to first use.
- Remove all packing material before first use.
- Please do not eat the first waffles.
START-UP
- Unroll the cable completely.
- Place plug into the outlet. Be careful, the appliance begins to heat up.
- Wait for approximately 5 minutes, with the waffle maker closed, to first heat up
before you start making any waffles.
OPERATION
1. Prepare the dough first (see below), the waffle dough must be allowed to stand
for several hours before it is suitable for use.
2. Lift the lid and lightly grease both waffle plates with a brush or a lint-free piece of
cloth, you may use butter, margarine or oil for this purpose. Do not apply too
much fat; otherwise the waffles will taste of fat.
3. Rotate the temperature control to position 0 and connect the mains plug to a
suitable plug socket, the red indicator lamp lights up, the unit begins to heat up.
4. Set the temperature control to the desired position from low to high, the correct
setting depends upon the recipe and your preferences, the green indicator lamp
lights up, the unit will heat up to the required temperature.
5. As soon as the set temperature is attained, the red indicator lamp will go off and
the green light will go on
6. Lift the lid by the handle and pour dough onto the bottom waffle plate, using a
spoon, do not overfill with dough; the dough expands during baking (if you
overfill, the dough oozes out from the unit up during preparation).