DESCRIPTION OF PARTS
1. Frying Basket
2. Frying Basket Handle
3. Frying Basket Handle
Release/Lock Button
4. Power Light (Red)
5. Ready Light (Green)
6. Temperature Control Knob
7. Cover Opening Button
8. Removable Cover
9. Condensation Collector
(not shown)
10. Frying Bowl
11. Viewing Window
12. Filter Cover (not shown)
13. Base
BEFORE FIRST USE AND ASSEMBLY
1. Open the Cover by pushing the Cover Opening Button and the Cover will
be in a vertical position. Remove the Cover by lifting upward.
2. To remove any residue that may be left over from the manufacturing
process, fill the Frying Bowl with 2 cups (500 ml) of warm soapy water.
Wash with a dishcloth or sponge. Empty, being careful that water does
not drip down the exterior wall of the Fryer.
IMPORTANT: DO NOT IMMERSE THE FRYER, CORD OR PLUG IN WATER
OR ANY OTHER LIQUID.
3. Rinse with about 2 cups (500 ml) of clear water. Empty.
4. Dry thoroughly.
5. Wipe the exterior wall with a damp cloth. Dry.
6. Remove the Filters.
7. The Cover, Frying Basket and Handle may be immersed in hot soapy
water. Rinse and dry thoroughly. NOTE: Do not use the Fryer until all
parts are completely dry.
8. Replace the Filters. (see the Replacing the Filter section)
4
5
9
4
2
1
3
7
6
8
12
10
11
13
Booklet_DF1240_ENG.qxd:Salton Booklet 3/18/11 3:05 PM Page 4
