BEFORE FIRST USE AND ASSEMBLY
1. Remove all packaging.
2. To remove any residue left over from the manufacturing process, wash
the Fry Bowl, Frying Basket/Handle Assembly and the Cover in warm
soapy water or in the dishwasher. Ensure that the Cover is completely
dry before using the fryer.
3. Wipe the Control Panel/Element with paper towels or a dry cloth.
NEVER IMMERSE ANY PORTION OF THE CONTROL PANEL / ELEMENT IN
WATER OR ANY OTHER LIQUID.
Fryer Assembly
When all of the parts are dry, reassemble the Fryer.
1. Place the Fry Bowl into the Base. The Fry Bowl should slide into the Base
without any resistance.
2. Place the Control Panel / Element Assembly into the Fry Bowl by sliding
the tabs on the Control Panel into the slots on the Base.
3. Place the Frying Basket/Handle Assembly into the Fry Bowl.
4. Place the Cover on the Fryer by lining up the end that has the 2 slots
over the Frying Basket Handle.
NOTE: The Fryer will only heat when the control panel is correctly
assembled and the Safety Button is pushed in.
Basket Assembly
Ensure that the handle of the Frying Basket has been correctly attached.
1. Press of ends of the wire handle together at the free end of the handle.
Insert the ends into the two small wire hoops inside the basket.
2. Once the Handle is inserted into the hoops, rotate the Handle so that it
locks into position over the wire tab at the top of the Frying Basket.
4
Booklet_DF1233_ENG_Salton Booklet 6/27/11 4:27 PM Page 4
