4
BEFORE FIRST USE
1. Remove all packaging.
2. Lift the Cover and remove.
3. Lift the Grinding Bowl and remove.
4. Wash the Cover and Grinding Bowl in warm soapy water or on the top
rack of the dishwasher.
IMPORTANT: Be careful when wiping out the Grinding Bowl, the
blade is very sharp.
5. Reassembly the Grinder by placing the Grinding Bowl back in the
Base. Turn The Grinding Bowl clockwise until it drops into the Base.
6. Place the Cover over the Grinding Bowl onto the Base. The On/Off
Switch must be lined up with the recessed area in the Base.
IMPORTANT: The Grinder has a Cover Interlock safety system
and will not turn on if it is not assembled correctly.
7. Ensure that the Grinding Bowl and Cover are completely dry before
using.
Power Cord
To extract the Power Cord from the Cord Storage gently pull down the
Cord Storage Cover and unwind as much of the Power Cord as you
need to reach the wall outlet. Feed the Power Cord through the Cord
Storage Notch then push the Cord Storage Cover back into place.
HOW TO USE
1. Remove Cover and ensure that the Grinder is empty and clean.
2. Place coffee beans or spices into the Grinding Bowl. DO NOT fi ll past
the MAX markings on the Grinding Bowl. Replace the Cover.
3. Place on a fl at, level surface and plug the Grinder into the wall outlet.
4. Press the On/Off Control. If you release the pressure from the
‘On/Off’ Control, the Grinder will stop automatically.
NOTE:
The Grinder has a Cover Interlock safety system and will
not turn on if it is not assembled correctly.
5. When the desired grind is obtained release the ‘On/Off’ Control
Button. DO NOT REMOVE THE COVER UNTIL THE BLADE COMES
TO A COMPLETE STOP. You may wish to grind in short intervals,
then check to see if more grinding is necessary. If so, simply repeat
the above steps, up to 30 seconds at a time.
NOTE:
The Grinder should not be run for longer than 30 seconds at a
time and then should be allowed to rest for 1 minute.
CG1462_Booklet.indd 4
CG1462_Booklet.indd 4
12/1/14 8:02 PM
12/1/14 8:02 PM
