5
OPERATING INSTRUCTIONS
1.
Ensure the unit is on the ‘O’ Off setting on the ‘Piano keys’. Insert the power plug into
the power supply.
2. Select the speed at which you want the unit to operate:
‘O’ is Off
‘1’ is low speed
‘2’ is intermediate speed
‘3’ is high speed
3.
To adjust the tilt of the fan head, set the unit to ‘O’, and wait for the fan blade to stop
turning. Loosen the tilt adjustment knob. Tilt the motor to the desired angle and
tighten the tilt adjustment knob.
4.
To adjust the height of the fan, set the unit to ‘O’ and wait for the fan blade to stop
turning. Loosen the height adjustment screw, while holding the height adjustment
tube (upper section of the shaft) firmly. Carefully raise or lower the fan and firmly
tighten the height adjustment screw.
5. Ensure all adjustment screws are tightened firmly before starting the fan.
CLEANING AND MAINTENANCE
This appliance is for household use only and is not user-serviceable.
Do not open or change any parts by yourself. Please refer to a qualified electrical
service department or return to the supplier if servicing is necessary.
Always remember to unplug the unit from the electrical outlet when not in use
and before cleaning. Ensure that the speed control is set to
“0”.
The appliance should be cleaned with a damp cotton cloth. Do not let water enter
the motor unit.
Do not use bleach or other abrasive substance or solvents to clean your
appliance as it can be damaging to the finish.
Do not immerse the mixer in water or any other liquid, or hold it under a running
tap to clean.
To remove stubborn spots/marks, wipe the surfaces with a cloth slightly
dampened in soapy water or mild non-abrasive cleaner. Rinse and dry a clean,
dry, soft cloth.
