8
USER MANUAL - XS4 CODE LOCKER-ENG-04-22
Once in Service Configuration Menu, the following actions can be performed:
4.1 Factory Reset
4.2 Clear All Users
4. CONFIGURATION
The service configuration code is used to authenticate and access the configuration menu,
which is needed to configure the Code Locker.
0
#
5
0
2
A confirmation beep will sound and all
LED’s will blink one time.
All the stored PIN codes are now
deleted.
Enter:
5
#
2
0
0
A confirmation beep will sound and all
LED’s will blink one time.
The keypad is automatically restarted
after a factory reset, and all LED’s will
blink once again at startup.
Enter:
Insert the Service Configuration Code
(12347890 is factory default)
A confirmation beep will sound and the
green LED will flash.
The keypad is now ready to be configured.
Service Configuration Menu
9
#
8
0
7
3
2
4
1
Enter:
