WRLUD24BXX-Manua-ENG-10-16
www.saltosystems.com
SALTO Systems - WRLUD24Bxx - Long Distance Reader manual
16
CONFIDENTIAL - This document contains confidential and privileged information.
The reproduction of any part of the document is strictly prohibited without the prior written consent of SALTO Systems S.L.
7.3 Starting WebConfig
Download the WebConfig software from
www.saltosystems.com.
Run the WebConfig software. Copy the file “WebConfig.exe” into a suitable directory on
your local hard disk and open it by double-clicking.
The configuration of the “WRLUD24Bxx” must be carried out as follows:
Step
Configuration Software “WebConfig.”
Reader WRLUD24Bxx
1
Connect the reader to the WRLUD-
SNG3 (see table page 16), connect
the WRLUD-SNG3 to the PC via the
USB cable, connect wall power supply
to WRLUD-SNG3
2
Start configuration software “WebConfig”
3
Select USB Serial Port
4
Click on “Device“ – “Search addresses“
5
Software searches for the reader which is connec
-
ted to the selected COM Port
6
After successful search the reader found will be
indicated
7
Current reader configuration will be read
8
Configuration menu will open
9
Configuration can be modified by user
10
Transfer changed configuration to the reader by
clicking on “Apply Changes”
11
Reader will store the new configuration
within its internal non- volatile memory
12
End connection by clicking on “Offline”
13
Program will be closed by “File“ – “Exit“
