OWNER’S MANUAL V. 112021 ENGLISH
PT-1591 CONNECT
This manual can be downloaded on
www.salter.es
6. DISPLAY SCREEN INSTRUCTIONS
KEY
DESCRIPTION
SCAN
. In SCAN mode, press the MODE / ENTER key to select functions.
. Automatically scan each function sequentially every 6 seconds.
. The display sequence when the MODE / ENTER key is pressed is: TIME
→
DIST
→
CAL
→
PULSE
→
RPM / SPEED.
SPEED
. Range 0.0 ~ 99.9
. If the monitor receives no signal for 4 seconds during training, SPEED will
display "0.0"
RPM
. Range 0 ~ 999
. If the monitor receives no signal for 4 seconds during training, SPEED will
display "0.0".
TIME
. Without adjusting the target value, the time will start to advance.
. When setting the target value, the time will count down from the target time
to 0; the alarm will sound when it reaches 0.
. If no signal is transmitted to the monitor for 4 seconds during training, time
will stop.
. Range 0:00 ~ 99:59.
DISTANCE
. Without adjusting the target value, the distance will start to advance.
. When setting the target value, the distance will count down from the target
distance to 0. The alarm will sound when it reaches 0.
CALORIES
. Without adjusting the target value, the calories will begin to advance.
. When setting the target value, the calories will count down from the target
calories at 0. The alarm will sound when it reaches 0.
. Range 0 ~ 9999
PULSE
. The current pulse will be displayed after 6 seconds when detected by the
console.
. Without any pulse signal for 6 seconds, the console will display "P".
. The alarm will sound when the current pulse is above the target pulse.
. Range 0-30 ~ 230 BPM