OWNER’S MANUAL V072023 ENGLISH
M-8370 TREADMILL FAST-70
This manual can be downloaded on
www.salter.es
5. INSTRUCTIONS FOR USE
GETTING STARTED
5.1 TURN POWER ON
Put the power cord into the electrical outlet. Flip this switch to the “ON” position. The screen will shine.
5.2 SAFETY KEY AND CLIP
The safety key is designed to cut the main power to the treadmill
should your fall. Therefore, insert the safety key into the key holder in
the middle of the console and clip the other end of the safety key to
your clothing; so that in the case that you fall, you will pull the safety
key from the console, which will stop the treadmill immediately to
minimize injury. If you want to stop safely the treadmill during the
training, use the safety key as emergency stop only.
5.3 GETTING ON AND OFF THE TREADMILL
Handle with care when getting on or off the treadmill. Try to use the
handlebars while getting on or off. While you are preparing to use the treadmill, do not stand on the running
belt. Straddle the running belt by placing your feet on both side rails of the treadmill deck. Place your foot
on the belt only after the belt has begun to move at a consistent slow speed (max 3Km/h). During exercise,
keep your body and head facing forward at all times. Never attempt to turn around on the treadmill when
the running belt is still moving. When you have finished exercising, stop the treadmill by pressing the red
stop button. Wait until the treadmill comes to a complete stop before attempting to get off the treadmill.