![Salter M-280 AIR BIKE Скачать руководство пользователя страница 21](http://html1.mh-extra.com/html/salter/m-280-air-bike/m-280-air-bike_owners-manual_4617310021.webp)
USER’S MANUAL V092023 ENGLISH
M-280 AIR BIKE
This manual can be downloaded on
www.salter.es
6. MAINTENANCE
How to Take Care of Your Bike
Storage
Keep the equipment in a dry place with as little temperature variation as possible. Try to protect from dust
and always unplug when not in use (if applicable).
The safety level given by the design of this air bike can only be maintained when this air bike is regularly
examined for damage and wear. Inoperable components should be replaced immediately or this air bike
should be put out of use until it is repaired.
IMPORTANT: NEVER REMOVE THE PROTECTIVE CASING.
Your air bike is designed for indoor exercising used only and should not be used or stored in damp areas.
Ensure you regularly check components for wear and make sure all the nuts & bolts are tightened before
each exercise session
Maintenance Tips
•
Always use a soft, cotton cloth and dilute non-abrasive cleaner or a mid detergent for cleaning the
exterior of this bike.
•
Never use ammonia, acid-based, or petroleum-based solvents on any portion of the bike as it may
damage the finish.
Preventative maintenance Schedule
Daily
•
Before each use, make certain that the area around the bike is free of obstacles that may interfere
with the dual action handlebar & pedal rotation.
Before each use, check that pedals & shaft screws are securely tightened and inspect both pedals & pedal
straps for wear. After each use, wipe down the surface of the air bike to remove sweat and moisture.
Wipe the face of the display console with a slightly damp, soft, cotton cloth. Avoid getting extra moisture on
the display console. Keeping the display console free of fingerprints and sweat will extend the life of the
console.
Weekly
•
Thoroughly clean the plastic housing of the bike.
•
Clean the top of the pedal straps, saddle & seat post, and the display console.
•
Check that pedals are securely tightened and inspect both pedals and pedal straps for wear.
•
Inspect all assembly bolts & nuts for wear and ensure that they are sufficiently tight.
Monthly
•
Make sure all of the open ends of metal parts are wiped with thin grease to protect from rust.
•
Check the ribbed belt is correct tension: replace cracked, frayed, or otherwise non-uniform belt. If
necessary, call your local authorized distributor for Customer Service replacement.
•
Inspect for side-to-side play in axle assembly, and a grinding feeling in crank area when pedaling. If
necessary, call your local authorized distributor for Customer Service replacement.
•
Check and Replace the Console AA Battery if needed.
•
Clean for dust on Fan Wheel Assembly by spray gun if available.
21