OWNER’S MANUAL V.012023 ENGLISH
M-060/WI INDOOR BIKE
This manual can be downloaded on
www.salter.es
Open screw (14) from handlebar top slider then assemble slider's locking piece (78) onto bottom slider ,
Pull console's cable(110) out from stem in a certain length like diagram shows then attach and insert
handlebar (11) onto handlebar stem (20).
Insert console's cable through into the console's suport tube then slowly sliding handlebar slider forward
and the same time to pull cable out from the tube until slider coming to a stop.
Screw bolt (14) back into top slider and assemble lock lever (12) to make tighten slider then insert slider's
end cap (74) into top slider.
Open 4 bolts (97) from the console (109) then connect console cable (110) with console ,attached console
onto console's suport tube then assemble and fix console by using 4 bolts(97) . Slide handlebar (11) until
reach your required position then use lock lever(12) for tighten. Using lock lever (18) for stem height
adjustment. NOTE: Do not arise above safety line.
STEP 4
Screw 2 bolts(108) and washers (82) from the bottle cage(11A) then attached the bottle cage with fixing
bracket, then screw back 2 bolts and washers and make tighten the bottle cage .
