OWNER’S MANUAL V. 042021 ENGLISH
E-2115 MAGNETIC ELLIPTICAL
This manual can be downloaded on
www.salter.es
OPERATION
1.
User Profile setting
Use UP or DOWN (ENCODER) to set SEX, HEIGHT, WEIGHT and AGE, press
MODE/ENTER to confirm.
2.
Workout setting
Press MODE/ENTER key to select the function of TIME, DISTANCE, CALORIES, and PULSE.
Use UP or DOWN (ENCODER) for setting and press MODE/ENTER key for confirmation.
For instance the time set-up, when the time value is blinking, you can use UP and DOWN
(ENCODER) to adjust the number. Press MODE/ENTER key for confirmation and skip to
next set-up. The set-up of DISTANCE, CALORIES and PULSE is the same as TIME set-up.
Once the workout begins and the console picks up the exercise signal, the value of
SPEED/RPM, TIME, DST and CAL will count up on the display.
Recovery
1.
The RECOVERY key will only be valid if pulse is detected.
2.
TIME will show "0:60" (seconds) and counts down to 0.
Computer will show F1 to F6 after the countdown to test heart rate recovery status. User can
find the heart rate recovery level based on the chart below.
3.
Press RECOVERY key again to return to the beginning.
F1
Outstanding
F2
Excellent
F3
Good
F4
Fair
F5
Below average
F6
Poor
Body Fat
1.
Press the BODY FAT key to start body fat measurement.
2.
During measuring, users have to hold both hands on the hand grips. LCD display “-” “- -” “- - -
” “- - - -” for 8 seconds until computer finish measuring.
3.
LCD will display BMI and FAT %.
4.
Error message:
*E-1–There is no heart rate signal input detected.
*E-4–Occurs when FAT% and BMI result is below 5 or exceeds 50.
Trouble shooting:
. When the display of LCD is dim, it means the batteries need to be changed.
. If there is no signal when you pedal, please check if the cable is well connected.
NOTE:
1.
When stop training for 4 minutes, the main screen will be off.
2.
If the computer displays abnormally, please re-install the batteries and try again.
