2
Cleaning Instructions
1.
Every 14 days wash the Bubble Humidifier with warm soapy water.
Use a non-scented, lotion free liquid dish detergent. If you use tap
water in your Bubble Humidifier, clean the Bubble Humidifier
every 3 days to help prevent buildup of mineral deposits. Do not
use bleach or ammonia solutions to clean your device.
2.
Rinse the Bubble Humidifier thoroughly with clean water.
3.
After cleaning the device, visually inspect to ensure that it is clean.
Repeat cleaning if necessary.
4.
Replace the Bubble Humidifier every 90 days (3 months), or sooner
if unable to remove mineral deposits by cleaning.
WARNING
Leaks may partially or fully reduce the oxygen being delivered.
Note
Using flow rates outside the recommend range of 6 LPM to 15 LPM
may affect the function of the safety pop-off valve.
Your setup may vary slightly depending on what system you use for your oxygen source.
SLML 112 Rev C 03/2019
Bubble Humidifier Technical Bulletin (continued)
For the most current revision of this technical bulletin and other
technical bulletins, visit Salter Labs website.
www. Salterlabs.com/resources
