4
TM
36
32
35
34
3.
Assemble Stake Pocket Mounts Refer to Fig. 3
• Assemble two stake pocket mounts as shown using (1) cover
plate
32
, (1) retainer nut plate
34
, (1) retainer plate 35, and (1)
3/8"-16 x 2½" bolt
36
.
• Insure “U” portion of retainer plate is facing up, or towards
cover plate.
• Thread bolt into retainer nut plate using 2-2½ turns. This bolt
will be tightened once inserted into stake pocket
of truck.
Fig. 3
4.
Insert Stake Pocket Mounts Refer to Fig. 4
• Install assemblies into stake pockets with the empty holes
towards the tailgate of the vehicle.
Fig. 4
• Insure “U” portion of the retainer plate securely engages sheet
metal of truck bed.
• Hand tighten hardware only.