SaltDogg TGS05B Скачать руководство пользователя страница 1

1

Installation Instructions

TGS05B

Fig. 1  Mounting

—continued inside

SAFETY PRECAUTIONS
WARNING

Observe the following Safety Precautions before, 
during and after operating this spreader. By following 
these precautions and common sense, possible injury 
to persons and potential damage to this machine may 
be avoided. 
1. Read this entire Owners Manual before operating 
this spreader. 
2. Read all safety decals on the spreader before 
operating. 
3. Verify that all personnel are clear of the spreader 
spray area before starting or operating this spreader. 
4. Do not adjust, clean, lubricate or unclog material 
jambs without first turning off the spreader. 
5. Make sure the spreader is securely fastened to the 
vehicle in accordance with this manual. 
6. Do not operate a spreader that is in need of mainte-
nance or repairs. 
7. Always disconnect the battery before removing or 
replacing electrical components. 

SPREADER ASSEMBLY

Check contents of box against parts list to make 
sure all components are included. When ordering 
replacement or spare parts refer to parts list for part 
numbers.

INSTALLATION

1. 

 Locate and mark center of tailgate.

2. 

 Assemble Angles (18, 19) and Braces (20) as 

shown in Fig.1 Use 3/8" carriage bolts, flat washers 
and nuts. Do not tighten fasteners at this moment.

3. 

 Center assembly on top of tailgate. Lower angle 

must be flush with top and inside surfaces of tailgate.

4.

  Position braces (20) on top of side rails. Using 

holes in braces as guides mark and drill holes for 3/8" 
screws.

5.

  Attach braces to side rails using 3/8" screws, flat 

washers and nuts.

6.

  Center spreader assembly on top of rear bumper 

and align with holes in Angle (18).

7. 

 Using holes in spreader frame as guides, mark and 

drill holes for 3/8" screws in rear bumper.

8.

  Assemble spreader to Angle (18) and rear bumper. 

Adjust position of Angles (18, 19) to bring spreader 
into vertical position. Tighten all screws at this 
moment.

Chart A Torque

   1/4-20    6.0
   5/16-18    11.0
   3/8-16    20.0

 

  BOLT NUT SIZE 

 

TORQUE (FT-LBS)

9049 Tyler Blvd. • Mentor, Ohio 44060

Phone (440) 974-8888 • Fax (440) 974-0165

Toll-Free Fax 800-841-8003 • saltdogg.com

Отзывы: