SALSA Alternator Low Deck 135 Скачать руководство пользователя страница 1

24855 7/17 | 85-000256_INST_C

ALTERNATOR REAR RACK INSTRUCTIONS

1

For additional product and safety information go to salsacycles.com/safety

At Salsa, we believe that a sense of adventure makes life better. 
The bicycle can be so much more than just a bike; it’s a path  
to new places, new people, and amazing experiences. 
Thank you for your purchase. We hope it makes a good riding 
experience even better!
Salsa. Adventure by bike.

®

 

WARNING: 

CYCLING CAN BE DANGEROUS. BICYCLE 

PRODUCTS SHOULD BE INSTALLED AND SERVICED BY  
A PROFESSIONAL MECHANIC. NEVER MODIFY YOUR BICYCLE  
OR ACCESSORIES. READ AND FOLLOW ALL PRODUCT 
INSTRUCTIONS AND WARNINGS INCLUDING INFORMATION  
ON THE MANUFACTURER’S WEBSITE. INSPECT YOUR BICYCLE 
BEFORE EVERY RIDE. ALWAYS WEAR A HELMET.

 

WARNING:

 The Alternator Rear Rack is designed and intended 

for use as a rear rack only. DO NOT USE AS A FRONT RACK.

Compatibility & Intended Use

The Salsa Alternator Rack is designed specifically for mounting  
to Salsa frames equipped with Alternator and Alternator 2.0 
dropouts. Alternator Racks are available in the four versions 
shown below.
Check to make sure the rack version you are attempting to install 
is the correct match for the frame and maximum tire fitment. 

 

WARNING:

 Alternator racks are designed specifically to be 

mounted only to frames equipped with Alternator dropouts.  
DO NOT USE WITH OTHER BIKES. Mounting to other frames may 
result in an over-expansion or over-compression of the rack 
lowers to fit the width of the frame, which may compromise the 
structural integrity of the rack, or possible contact between the 
rack and the wheel/tire due to variations in the rack-mounting 
boss locations. 

All versions of the Alternator rack have a load 

capacity of 27 kg (59.4 lb). Do not exceed this load limit. 

H

(HEIGHT)

L

(LENGTH)

D

(HOOK SPACING #1)

E

(HOOK SPACING #2)

  L2  

  L1  

C

(CLEARANCE HEIGHT)

  SEE NOTE A  

  SEE NOTE A  

W

(DECK WIDTH)

A±10

(MOUNT WIDTH)

SEE NOTE B

50

(DIN-STANDARD 

LIGHT MOUNT)

B

(CLEARANCE WIDTH)

RACK MODEL

HEIGHT WIDTH

LENGTH L1

L2

A

B

C

C

E

LOAD 

CAPACITY

FITS FRAMES 

WITH REAR 

SPACING

FITS FRAMES WITH MAX TIRE SIZE

Alternator Low Deck 135/148 325

110

340

135 210 190 100 305 260 300 27 kg (60 lb) 135–148 O.L.D.

29 x 2.1" (700 x 51 mm) w/o fender
29 x 1.65" (700 x 42 mm) w/ fender

Alternator Plus 135/148

340

135

325

115 210 190 135 320 260 315 27 kg (60 lb) 135–148 O.L.D. 29 x 3.0" / 27.5 x 3.25"

Alternator 170/177

340

135

325

115 210 230 140 320 260 315 27 kg (60 lb) 170–177 O.L.D. 29 x 3.0" / 27.5 x 3.25" / 26 x 4.3"

Alternator 190/197

340

135

325

115 210 250 146 320 260 315 27 kg (60 lb) 190–197 O.L.D. 29 x 3.0" / 27.5 x 3.25" / 26 x 4.8"

All measurements in mm unless noted.

Note A:

  Proper installation requires at least 6 mm of clearance to be maintained between any rotating wheel component and all portions of the rack.

Note B:

  Mount width “A” may be adjusted up to 10 mm in either direction to fit frame. if required adjustment is more than 10, select next size rack.

Отзывы: