- 8 -
Swan steamer installation & user guide
Trouble shooting
The steamer ‘beeps’
If the water level is not covering enough of the
element the steamer will automatically stop and
beep to remind you to refill it. The steamer
features a safety cooling system that takes
about 10 minutes to reset.
To correct:
Fill with water and leave for 15
minutes, then restart the steamer.
The steamer continually beeps with water at
the correct level.
If the water jar is not correctly positioned the
steamer has a safety cut-off and beeper warning
to warn you.
To correct:
1. Turn the steamer OFF and remove the plug
form the wall socket.
2. Completely unscrew the jar (Fig. 13)
anticlockwise to loosen.
3. Empty the water from the jar.
4. Turn the steamer upside down.
5. Carefully align the plastic grooves of the jar
and the steamer base.
6. Twist the jar clockwise to tighten.
The steamer spits
Spitting is due to inappropriate use of normal
tap water or oils in the water system.
To correct:
Cleaning may help. Try a strong
white vinegar solution. This should reduce the
lime scale or oil that is “holding” the water that
is spat out.
The steamer will not start
To correct:
Check fuse and ensure wires or
plug are not damaged.
Care of your
steamer
It is your responsibility to keep the unit clean and
maintained.
Please inspect the unit before every use. Do not
use your Salonserve Swan Steamer with worn or
damaged parts. Parts must be replaced and not
repaired. Only use genuine Salonserve parts.
You will be subject to local laws and regulations
whilst you are using your Salonserve Swan Steamer
in a professional environment e.g. Health and
Safety legislation. It is your responsibility to ensure
compliance of these regulations.
Keep the glass water jar clean. Clean on a weekly
basis with a white vinegar solution, this will reduce
lime scale and prolong the life of your element.
Clean the unit with a damp soft cloth.
Keep the unit away from any other heat sources
and children.
Do not let the water drop below the element in the
water jar as this may lead to uneven automatic cut
out.
Always screw and unscrew water jar gently to avoid
over tightening the jar leading to breakages.
PLEASE NOTE:
1. DO NOT FILL THE STEAMER BY REMOVING
THE JAR, ALWAYS FILL FROM THE TOP.
2. REGULARLY DE-SCALE YOUR STEAMER.
3. DO NOT PUT OILS IN THE WATER.
In all eventualities if you have any questions please
call Salonserve.
