Salind 01 by SALIND with Online-Tracking V.1.1 EN
© Salind UG (haftungsbeschränkt)
17
1.
2.
2.
Please always observe the manufacturer's
specifications for your vehicle. Compensation
claims due to incorrect connections are hereby
excluded.
2.5
Installation
Please proceed as follows when connecting the GPS-
Tracker to your car battery. The following figure
serves as a guide.
1.
Connect the Salind 01 to the cable harness using
the black plug-in function.
2.
Connect the device to the battery. Connect
the red
cable with the fuse to (+).
Connect the black cable
to Minus (-).
Attention! The poles must never be reversed.
Note: When connected to the power supply, the
Salind 01 switches on immediately and the LED
lights emit a signal.
2.6
Turning on
After a successful activation you can switch on the
SALIND 01. By connecting the GPS-TRACKER to the
power supply the device has already been switched
on.
For the initial startup of the Salind 01 uncovered
locations, such as the garden or the terrace (i. e.
not inside the home, the garage, the cellar or the
like) are recommended.
2.7
Use
Once the activation, switching on and the transfer of
a first database has been successful, you can attach
the GPS-TRACKER to a location of your choice and
view the position of the GPS-TRACKER using a
smartphone, tablet or PC. Please use our app or go to
the following website:
www.finder-portal.com
The portal will support you step by step in its
functions.
Battery
9-75V
Black
Red
Fuse
