Salicru SPS.ONE Series, Руководство пользователя

Страница: 11 / 16

11
5.4. CONNECTING THE COMMUNICATION CABLE
•
To enable unattended start-up/stop of the UPS and to mon-
itor its status, connect one end of the communication cable
to the connector 4 of the USB HID port of SPS.ONE and the
other end to the communication port of the PC.
•
With the monitoring software installed in your PC, you can
programme the UPS start-up/stopping time, as well as
monitor its status in real-time. Follow the steps described
below before downloading and installing the monitoring
software:
5.5. DOWNLOADING AND INSTALLING THE SOFTWARE
•
To download the free monitoring software, register as a
user and then register your unit(s) at the following site:
support.salicru.com
•
You will find a link to the "ACTIVATION GUIDE " on the reg-
istration page. Follow the steps indicated.
•
Once you have registered, you can download the software
for each model from the site:
support.salicru.com/software
•
Use with your installation as with any other type of soft-
ware.
•
When you reboot your PC, the monitoring software will ap-
pear as an orange icon on the system tray, next to the clock.
5.6. STARTING UP/STOPPING THE UNIT
5.6.1. Starting up the SPS.ONE
•
With SPS.ONE stopped, press the button 7 to start the unit.
•
When the unit is started, an internal test is performed and
all LEDs are turned on. The process takes a few seconds,
after which the UPS will supply an output voltage, either
from the mains or from its batteries.
The auto-test will be performed regardless of whether the
start-up process is carried out with the unit connected to
the mains or running on its batteries (no mains connection).
•
Start up the loads.
5.6.2. Stopping the SPS.ONE
•
Stopping the loads.
•
Switch the unit off, press the button 7 .
USER MANUAL SPS.ONE UNINTERRUPTIBLE POWER SUPPLY (UPS) SYSTEMS