Salicru EQUINOX EQX2 3001-HSX, Руководство пользователя

Страница: 77 / 104

77
EN
Fig. 58. AC BACK-UP connection.
8.
Place the housing in its position and secure it using the
4 screws included in the package.
9.
Insert the relevant AC circuit breakers in between, as shown
in the table below:
Model
Circuit breaker (*)
Dif-
ferential
relay
Over-
voltage
protec-
tion
Previous
fuse.
Max.
value
(1/phase)
Without
batt.
With batt.
EQX2
3001-HSX
2P 20 A C
curve
2P 30 A C
curve
2P 25 A
30 mA
Type B
Type II
40 kA
230 V TT
125 A gL
EQX2
4002-HSX
2P 25 A C
curve
2P 40 A C
curve
EQX2
5002-HSX
2P 30 A C
curve
2P 50 A C
curve
EQX2
6002-HSX
2P 40 A C
curve
2P 63 A C
curve
EQX2
8002-HSX
2P 50 A C
curve
2P 32 A
30 mA
Type B
Tab. 17. AC circuit breakers.
(*) If your system has batteries, the capacity of the input
circuit breakers must be higher than it is in systems without
batteries, as it may be necessary to charge the batteries and power
the loads simultaneously via the AC mains input.
10.
Connect the other end of the bundle to the AC circuit breaker
for the critical BACK-UP loads.
Fig. 59. Complete diagram of the AC BACK-UP connections.
5.4. INSTALLATION OF THE MONITORING
DEVICE.
5.4.1. Mechanical installation.
The single-phase inverter of the EQX2 series supports WiFi and
RS485 communications.
Plug the WiFi module into the USB (WiFi) port located at the
bottom of the inverter (as shown in Fig. 60). A "click" indicates that
the module has been fitted correctly.
Fig. 60. Communication device connection (WiFi antenna).
EQX2 SOLAR INVERTERS CONNECTED TO THE GRID USER MANUAL