15
SALICRU
6. Device reception.
6.1. Reception and unpacking.
•
On reception of the device, check that it has not been dam-
aged during transportation. If it has been damaged, notify
your supplier or, in their absence, our company. Also check
that the information on the label affixed to the packaging
matches that specified on the order. If it does not, report the
issue as soon as possible, quoting the device’s manufac-
turing number and any delivery note references.
•
After reception, if it is not put into service immediately, it is ad-
visable to keep the device in its original packaging to protect
it from impacts, dust, dirt, etc.
•
The packaging of the device consists of a wooden pallet (if re-
quested in the order), cardboard box, expanded polystyrene
(EPS) corners, polyethylene cover and polyester strapping.
All of these materials are recyclable, so any disposal must be
carried out in accordance with current laws. We recommend
keeping the packaging for possible future use.
Fig. 5.
Unpacking process.
•
To unpack the device, follow the steps in Figure 11.
Cut all of the polyester straps «
» and remove the cor-
ners «
».
Remove the lid «
».
Remove the four corners «
».
Remove the cardboard box «
». To do so, lift it upwards
and remove it completely.
The device will be standing on the pallet wrapped in its
plastic cover «
». Remove it by pulling it from above.
In general, cabinet systems are supplied without a pallet,
unless expressly requested in the order, since the base
is designed, among other functions, to enable the entry
of a pallet jack or forklift and facilitate transportation to
the site.
Содержание DC POWER-L DC-75-L 12P 110V EE671774-1
Страница 2: ...2 USER MANUAL...
Страница 31: ...31 SALICRU...
