manualshive.com logo in svg

Salford I-5100 12, Сборка и каталог запчастей

Поделиться
Скачать
Salford I-5100 12 Скачать руководство пользователя страница 9

Wing Fold

  Wings may fall rapidly causing 

injury.

  Do not stand under wings. 

  Always stay clear of wings when 

being lowered, raised, or in an 

elevated state. 

  Always use wing locks when 

raised.

  Ensure cylinders are completely 

filled with hydraulic fluid to avoid 

any unexpected movement. 

Hydraulics

DO NOT

 search for high pressure 

hydraulic leaks without any hand and 

face protection. A tiny, almost 

invisible leak can penetrate skin, 

requiring immediate medical 

attention.

  Use cardboard or wood to 

detect leaks – never your hand. 

  Double check that all is clear 

before operating hydraulics. 

NEVER

 remove hydraulic hoses 

or ends with machine elevated. 

Relieve hydraulic pressure before disconnecting hydraulic hoses or ends. 

  Use transport/maintenance locks when machine is raised. 

  Maintain proper hydraulic fluid levels. 

  Keep all connectors clean for positive connections. 

  Ensure all fittings and hoses are in good condition and are properly tightened. 

NEVER

 work on or under an elevated machine unless it has been locked up 

using the transport/maintenance locks. 

DANGER

 

DANGER

 

General Safety Precautions

Feb-09-2016

Page 9

Salford Group Inc.

MNPI-51-1229-16A I-5100 12', 19', 22', 25', 29' Assembly and Parts Manual 2016

Содержание I-5100 12













































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды