Salewa Duro 2.0, Инструкция по эксплуатации, Страница: 9 / 32

EN
Illustration 2 – Adjusting the chin strap:
The chin strap should sit at the sides of your head and is fastened with the buckle under your chin�
For a snug and comfortable fit, the strap length can be adjusted under your chin. To position the strap
properly at the sides of your head, open the clips and adjust the strap length to fit your head shape
so that the strap sits below your ears on both sides� The straps must not cover your ears� When the
buckle is closed, the chin strap should not apply any pressure on your Adam’s apple�
Illustration 4 – Check:
When the chin strap is fastened and the headband is flat to your head, ensure that the helmet is
sitting level horizontally and that it cannot slip forwards or backwards�
Illustration 3 - Attaching a headlamp:
To attach a headlamp to your helmet, slide the headlamp strap under the flexible clips on the outer
shell and position the lamp at the front of the helmet�
STORAGE, TRANSPORT AND CARE INSTRUCTIONS
Storage
You should store your helmet somewhere dry, cool and well ventilated, away from direct sunlight�
Avoid storing the helmet near any heat sources, nor anywhere where it is exposed to direct or persis-
tent UV rays or extreme temperatures� Do not store your helmet in your backpack� Ensure that your
helmet never comes into contact with aggressive chemicals such as battery acid, solvents or salt�
Cleaning and maintenance
Heavy soiling on your helmet can be washed off with mild soap but do not use any chemical clean-
ing products or solvents� Rinse your helmet thoroughly after cleaning and dry it all over with a towel�
Do not carry out any repairs or modify your helmet yourself� If you notice that the helmet is dam-
aged, you should replace it� Any incorrect action performed on your helmet or any changes made to
it can adversely affect the helmet’s protective capability.
If you have any questions regarding replacement parts for your helmet, please contact your SALEWA
specialist dealer�
Transport
Protect your helmet from any mechanical wear or damage, solar radiation, chemicals or dirt� The best
approach is to get a protective bag for your helmet and/or a special storage and transport container�
Your helmet is delivered in a robust box which can be used for this purpose�
LIFESPAN
The helmet’s lifespan is very dependent on the following factors: regularity of use, type of use, exter-
nal influences, correct maintenance and cleaning method. SALEWA explicitly recommends replacing
any safety equipment (PSA/PPE equipment) after a maximum of 10 years from the date of produc-
tion, regardless of whether the product has been used regularly or not� Extreme and very demanding
usage can even lead to a lifespan of less than one year. If the helmet suffers any extreme shock loads
such as those that arise following a climber falling, or in cases of rock and ice fall, it must be replaced
immediately even if there are no visible signs of damage�
Illustration 6 Product markings
Manufacturer:
Oberalp AG, Via Waltraud Gebert Deeg 4, 39100 Bolzano
Certification:
Apave Sudeurope SAS, Centre d’Essais et de Certification EPI 17,
Boulevard Paul Langevin, 38600 FONTAINE - France
9