11
Smarty 2R VE / 2R VE plus
www.salda.lt
b
30 mm
a
c
d
90
90
Mounting on the wall:
a) To reduce the vibration stick the insulating tape on the unit‘s
casing side which touches the wall before mounting the unit on the
wall.
b) The unit has to be mounted on the mounting brackets.
c) AHU mounting drawing.
d) After the unit is mounted two wall bracket tabs has to be
folded to 90
o
angle by pliers to avoid the accident fall of the unit.
• Installation works must be performed only by trained and qualified personnel.
• If you have any questions regarding the save installation and use of the product,
please contact the manufacturer or the representative.
• Before installing the unit, unscrew the lid a covering the opening for connection of
the kitchen hood and remove the middle part of the insulating ring.
• Cut the connecting opening as indicated on the insulation material.
• Carefully remove the lid, which covers the electric connection for the connection of
the electrical part of the kitchen hood to the ventilation unit.
• Mount the hood to the ventilation unit. Fasten with self-tapping screws to the des-
ignated connection points.
• It is necessary to ensure the tight and reliable connection of the air ducts of the
kitchen hood to the ventilation unit and the electrical contact of the control circuit.
• The subsequent installation of the device is performed according the description in
chapter “Mechanic installation”.
• Properties, assembly, control, use and maintenance of the kitchen hood are de-
scribed in its instalation manual.
Use cooker hood supplied by our company only. Equip-
ment is not tested with other cooker hoods and company
holds no responsibility for malfunction or failures of the
equipment in this case.
