Salda RIRS 350 P EKO 3.0 Series, Монтаж и инструкция по установке

Страница: 2 / 28

2 | EN RIRS 350 P EKO 3.0 v2021.1
CONTENT
2. SYMBOLS AND MARKING 3
3. SAFETY INSTRUCTIONS AND PRECAUTIONS 4
4. INFORMATION ABOUT THE PRODUCT 5
4.1. DESCRIPTION 5
4.2. DIMENSIONS AND WEIGHT 5
4.3. TECHNICAL DATA 6
4.4. OPERATING CONDITIONS 6
4.5. STANDARD PACKAGE OF COMPONENTS 6
4.6. DESCRIPTION OF COMPONENTS 7
5. INSTALATION 8
5.1. RECEPTION OF GOODS 8
5.2. TRANSPORTATION AND STORAGE 8
5.3. UNPACKING 8
5.4. PIPING AND INSTRUMENTATION DIAGRAM 9
5.5. MOUNTING 10
5.5.1. UNIT PLACING AND MOUNTING POSITIONING REQUIREMENTS 10
5.5.2. CEILING-MOUNTING OF THE UNIT 10
5.6. CONNECTION OF THE AIR DUCT 10
5.7. CONNECTION OF THE UNIT TO ELECTRIC NETWORK 11
5.8. START-UP RECOMMENDATIONS 11
5.8.1. SYSTEM PROTECTION 11
5.8.2. PRE-STARTUP RECOMENDATIONS OF THE UNIT (IN THE PRESENCE OF THE ENDUSER) 11
6. MAINTENANCE 12
6.1. SAFETY INSTRUCTION 12
6.2. GENERAL RECOMMENDATIONS FOR VENTILATION SYSTEM MAINTENANCE 12
6.3. COVER OPENING 12
6.4. FILTERS MAINTENANCE 13
6.5. ROTOR MAINTENANCE MAINTENANCE 13
6.6. FANS MAINTENANCE 13
6.7. HEATER MAINTENANCE 14
6.8. CONTROL BOARD MAINTENANCE 14
7. CONTROL 15
7.1. DEVICE CONTROL 15
7.2. DEVICE FUNCTIONS 15
8. ACCESSORIES 16
8.1. CONNECTION OF ACCESSORIES 17
8.1.1. FIRE PROTECTION SIGNAL INPUT (FIRE PROTECTION INPUT (NC)) 17
8.1.2. EXTERNAL CO
2
/PRESSURE SENSORS 17
8.1.3. ROOM CO2 TRANSMITTER INSTALLATION RECOMMENDATION 18
8.1.4. CO2 CONCENTRATION ACCORDING TO PETTENKOFER LIMIT 18
8.1.5. CONNECTION OF SUPPLY AND EXTRACT AIR DAMPERS 18
8.1.6. CONNECTION OF REMOTE CONTROL PANEL OR MODBUS 19
8.1.7. WATER HEATER CIRCULATION PUMP AND VALVE ACTUATOR 19
8.1.8. RECOMMENDED SCHEME FOR CONNECTION OF INTERNAL AND EXTERNAL COMPONENTS 20
9. POSSIBLE FAULTS AND TROUBLESHOOTING 22
10. ECODESIGN DATA TABLE 23
11. DECLARATION OF CONFIMITY 24
12. WARRANTY 25
12.1. LIMITED WARRANTY COUPON 25